Technical Resource > FAQ’s > Error Code > PLC
02->a fixed value**->refer to the table below.
Error Code |
Description [external_link_head] |
Cause or Measures |
00 [external_link offset=1] |
Correctly executed | |
01 |
Parity error | |
02 |
Sum error Alarm | Showing that my station doesn’t occupy CPU due to the processing Monitor |
03 | Framing error | |
04 | Overrun error | |
05 | Protocol error BUSY | Another task code was being executed and the required task code could not be executed. |
06 | ASCII error | |
07 | RECEIVE Buffer error | |
08 | RECEIVE Time over Network error | Communication block |
11 | Undefined task code | |
12 | Undefined feature-selecting code | |
14 | Address error | |
15 | No. of steps, No. of words error | |
16 | I/O code error | |
17 | I/O No. error | |
19 | Tried to write more than the memory volume | |
1A | Memory size over | |
20 | Not occupied yet | My station doesn’t occupy CPU. |
31 | ROM memory | |
32 | Not accommodate to a parameter area | |
33 | Occupancy code disagreement (occupied by READ) | |
34 | Occupancy code disagreement (occupied by WRITE) | |
35 | Another station is debugging | |
36 | Four stations are occupying via READ | |
37 | My station doesn’t occupy CPU | |
38 | Another station is occupying CPU | |
3A | RAM memory error | |
3B | CPU is running | |
3C | Operation error | |
3D | No program | |
3E | Task code combination error | |
3F |
The program is unreasonable |
*As to other errors, refer to a manual of a PLC manufacturer.
Error Code |
Description |
Causes [external_link offset=2] |
Countermeasures |
||||
FD |
Data reception error | Cable was disconnected while the machine is turned ON. | |||||
FE |
Data reception time out | Incorrect PLC settings. |
|
||||
PLC’s power is not turned ON. | |||||||
Incorrect cable connection or wiring. | |||||||
Incorrect data transmission settings. | |||||||
FF |
Data transfer time out | Incorrect cable connection or incorrect data transmission settings. |
|
||||
The GP’s cable has not been connected. |
[external_footer]